Filters may also be used to control dust. The fans used for exhausting flammable fumes are fitted with appropriate flameproof motors and non-sparking impeller tracks. The other filter is an intake filter that catches dirt, dust, insects, and other contaminants before they enter the paint booth. The removal of overspray and detackifiers puts an additional load on the HVAC system. Due to our continued efforts to improve product design and performance, CFW reserves the right to alter any product details specified here without notice. Most of this mist of paint is invisible, but it nevertheless presents a health risk for workers (isocyanate paint mists are known to cause occupational asthma) and can harm the quality of the finish on the product. Paint spray booths are pressure-controlled enclosed spaces for painting vehicles. Our fans are robust and constructed from high-quality materials for reliable operation even under demanding conditions. Cross-draft booths draw the air towards the booth opening. For lighter spray applications, the booth may be constructed of aluminium, whereas a more robust material such as steel or concrete is required for medium to heavy applications. In particular, we manufacture vertical discharge roof units from durable fibreglass, designed to discharge the pollutants at high velocities to prevent recontamination of the exhausted space and to comply with pollutant control legislation. CFW manufactures and offers a range of spray booth ventilation fans. Typically, large centrifugal fans are used to accomplish this task. Some decisions must be taken, when initially decided to obtain a spray booth. Cost of a spray booth system and ultimately its final configuration is affected by, requirements such as size and portability of refinish object, material that spray booths are made of, and … High airflow rates are needed to properly ventilate the space to remove the overspray and improve visibility. The design of spray booths depends on the particular requirements of the application, as well as the efficiency that can be achieved. We can make provision for a wide range of booth sizes and pollutant loads. One is a paint booth exhaust fan installation that captures over-spray before it enters the general environment. Important codes that paint booths comply with include National Fire Code 1, NFPA 33, OSHA, and a few others. CFW Environmental designs and builds spray booths for the auto industry that will do the job efficiently while keeping costs low. For a good overview of all paint booth code compliance check out this article. 3 Parin Road, Parow Industria, 7500, Western Cape, 4 Chilworth Road, Founders View North, Modderfontein, Edenvale, 1645, Gauteng, T +27 (0)21 931 8331 F +27 (0)21 931 3165, T +27 (0)11 452 5830 / 5146 F +27 (0)11 452 5132, Production/Process Temperature and Humidity Control, Food and Beverage Processing Climate Control, Confectionery Process Temperature and Humidity Control, Dairy Products Processing Climate Control, Pharmaceutical Production Environmental Control, Food Storage Temperature and Humidity Control, Seed Storage Temperature and Humidity Control, Operating Environment Temperature and Humidity Control, Document, Paper and Historical Artifact Climate Control, Climate Control for Libraries and Archives, Paper Storage Temperature and Humidity Control, Metrology Room Temperature and Humidity Control, Shot Blasting and Sand Blasting Dust Extraction System. This exhaust fan needs to be properly sized to move enough air out of the work area. The old standard was 100 linear feet per minute (lfm), and this is still stated in the International Fire Code (IFC). Region of Enquiry To remove the airborne paint, chemical detackifying agents are normally used. The ventilation systems used in the spray booth may use cyclones to prevent the introduction of pollutants or to recover powder in the case of powder spraying. When spraying paint in a paint booth, you need to expel the fumes from the work area. They are commonly cased axial aerofoil fans or vertical roof jet fans. The ventilation systems used in the spray booth may use cyclones to prevent the introduction of pollutants or to recover powder in the case of powder spraying. In sufficiently high concentrations, the fumes will cause health problems and may even lead to serious injury. Filters may also be used to control dust. a) in the case of a spray booth, all space that is within a horizontal distance of 6 m of the openings in the spray booth (with the same vertical requirements as in 5.4.2); and b) in the case of a spray room, that space that is within the spray room but that is not classified as a zone 1 location. Temperature, airflow and humidity must all be controlled by means of the ventilation system, which will include fans and burners to heat the air. Depending on the design of the booth, these fans can be fresh air supply fans, recirculation fans or exhaust fans. Excess paint removal is essential. The design of spray booths depends on the particular requirements of the application, as well as the efficiency that can be achieved. Spray booth safety tips. The fans used for exhausting flammable fumes are fitted with appropriate flameproof motors and non-sparking impeller tracks. A variety of ductwork, accessories and components is also available. Whilst our sales engineers are able to guide end-users on the National Building Regulations related to spray booth and flammable store ventilation, we urge the industry to consult with their local fire department for a proper assessment and directives. Aside from these minimum requirements for paint booths, there are some essential safety practices to make sure your booth is maintained properly: Restrict access for anyone with asthma, allergies, and respiratory illnesses. Why Paint Booth CFM is Important Paint booths are designed to meet a minimum air flow requirement to be compliant with national codes that govern spray booths. Spray booth fans listed below are designed for a general Spray booth fan applications and are suitable for the majority of specific requirements for Spray booth applications. While they are easy to build, the air moves over the painted surface and dust contamination is therefore more likely to be a problem. Whilst our sales engineers are able to guide end-users on the National Building Regulations related to spray booth and flammable store ventilation, we urge the industry to consult with their local fire department for a proper assessment and directives. Down-draft booths draw the air into filters at the bottom of the booth and are less likely to cause dust contamination problems, but are more difficult to build. The ventilation system of the booth also needs to introduce make-up air to replace the large volumes of air that are exhausted from the booth. Keep your spray booth … The fumes are removed from the area by use of an exhaust fan. Region of EnquiryWestern CapeGautengFree stateNorthern CapeKwazulu-NatalMpumalangaLimpopoNorth WestEastern CapeOther(International), 3 Parin Road, Parow Industria, 7493, Western Cape, South Africa, Latitude: -26.103462 Longitude: 28.173319, 4 Chilworth Road, Founders View North, Modderfontein, Edenvale, 1645, Gauteng, Latitude: -33.928757 Longitude: 18.608718, Port Elizabeth Sales: +27 (0)83 301 6357 Port Elizabeth Servicing: +27 (0)83 301 6357/ +27 (0)81 892 4582 Kwa Zulu Natal: +27 (0)83 501 6535 Large / Heavy Duty Fans: +27 (0)83 778 7555 Customer Queries: +27 (0)83 301 6357. The method of application used in the booth also has an influence on design. OSHA 29.1910 and NFPA-33 have minimum requirements for air flow to decrease the concentration of flammable materials in a spray paint booth. Modern ventilations are often tasked with offering a curing mode as well. An extremely wide array of paints is available, and their different properties entail the need for different designs to optimise paint elimination.