Boompole/Mic Stand Shock Mount. All rights reserved. In the box. Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching. Or buy a NTG4+ from one of our recommended online retailers in United kingdom. The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging. Windscreen Minimizes Wind Noise The NTG4+ has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. Directional Condenser Microphone with Inbuilt Battery. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. The Dead Wombat windshield, caring brush and tail/patch cable are included. SM5. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). This includes personalizing content and advertising. On that series, the low end is markedly rolled off. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product. Rode SM4-R Suspension Microphone Shock Mount for 3/8" or 5/8" Thread Mounts Bestshoot Microphone Shock Mount Universal Holder Clip + Hot Shoe Adapter for Condenser Shot gun Mic D230, ME66, NTG-2,NTG-1, AT-875R Neewer NW-81(1Pack) In the box. Camera Ring-Clamp Shock Mount. Not so much on the NTG4 and NTG4+. I don’t find it to be a problem. By continuing to use our site, you accept our, Review: Rode Blimp windshield (2014) with Rycote Lyre suspension, RØDE University - Location Sound Effects Recording, Click to find an authorised RØDE seller >>, Accommodates most shotgun microphones 325mm in length and 19-22mm diameter, Rycote Lyre suspension system onboard with internal spacing guide, Lightweight skeleton handle with 3/8” thread mount, Mogami cable with Neutrik and Switchcraft XLR connectors, 10 year warranty (no registration required), © 2020 RØDE Microphones. If you have a question or a support enquiry about the NTG4+ head over to our contact page to get in touch or locate your local distributor here, We use cookies to understand how you use our site and to improve your experience. Alternatively, mount the NTG4+ in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications. This includes personalizing content and advertising. I like the change; a little tighter low end. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted. RM5. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The SM4 suspension shock mount gives you the ability to isolate microphones from external physical factors that may cause unwanted rumble and vibrations in the microphone. There are shotgun mics like the Shure VP 89 that are obviously designed for run and gun ENG work in very noisy environments. ... Wind Shield and Shock Mount System. RØDE tweaked the capsule or capsule response in these two new mics, rolling off a bit of the low end that their NTG1 and NTG2 capture. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. If you have a question or a support enquiry about the Blimp head over to our contact page to get in touch or locate your local distributor here, Lightweight Mounting Adaptor for RØDE Blimp, Directional Condenser Microphone with Inbuilt Battery, We use cookies to understand how you use our site and to improve your experience. All rights reserved. Camera Shoe Shock Mount. Or buy a Blimp from one of our recommended online retailers in Netherlands. SM4. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. By continuing to use our site, you accept our, Introducing the NTG4 and NTG4+ Shotgun Microphones, Click to find an authorised RØDE seller >>, Read the complete review at: tyfordaudiovideo.blogspot.com.au, -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz, 1 year with free extension to 10 years following registration, Internal rechargeable lithium battery, supplying over 150 hours operation, Fully charged in under two hours via MicroUSB, © 2020 RØDE Microphones. The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. In the box. Yes they have revoiced the capsule, relative to the NTG1 and NTG2. The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. In the box. SM3. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging. Visit the NTG4 feature page The SM4 adds functionality to the R˜DE NTG-1, NTG-2, NTG-3, NT3, NT4 & NT5 microphones and attaches to any 3/8" or 5/8" threaded microphone stand.

rode ntg4+ shock mount

Best-smelling Shampoo 2020, Generating Story Ideas, Italian Plum Chutney Recipe, Baron Tahini Recall, Samsung M31 Uk Price, Cracker Barrel Cuts, Mormon Murders Book,
rode ntg4+ shock mount 2020