WOW Alice this was a brilliant idea – great seam for an unlined jacket! Works on curves, huh? Press the middle together to one side. Have a comment? The ‘mock’ french seam finish can be used on curves, unlike the traditional French seam. How To Sew A Mock French Seam Place fabric pieces right sides together. Yes it is Kathleen. After stitching your pieces together, iron the seam open. © 2020 Alice & Ann. All Rights Reserved. Unfold the piece and iron the seam to one side. STEP 4: Press one side of the seam allowance in half so that the raw edge meets the center of the seam. Then, iron each edge over 1/8th inch towards the middle. Fold open and press the seam to one side. This is how the finished seam will look below. Both the French Seam and the Mock French Seam are great for finishing the inside of your garments. STEP 8: The raw edges are encased inside the folded seams for a neat finish. Click here to see our collection of apparel fabric! Stitch down the fold with a 1/2 inch seam allowance, make sure to back stitch at the start and end. A French seam, which is one of the most common seams found in apparel, can be used in pants, shirts, unlined bags, and dresses. The mock French seam is another easy way to create a clean finish on your seams for light to medium weight fabrics. This completes the French seam. Fold in half with the seam on the inside, and iron again. STEP 5: Press the other side of the seam allowance in half so the raw edge meets the center of the seam. Step 1: Pin the RIGHT sides of your fabric together. The mock French seam is used for similar purposes, but works better around curves than the French seam. Fold the piece in half with the seam on the outside and iron. A French seam, which is one of the most common seams found in apparel, can be used in pants, shirts, unlined bags, and dresses. You can use the questions box to leave a comment too. Do I Really Need To Make a Muslin or “Toile”. Pin in place to secure. We want to hear! Fold the seam allowances inwards so that the raw edges meet at the original seam … Sew the length of the fabric pieces with your chosen seam allowance. The mock French seam is used for similar purposes, but works better around curves than the French seam. Step 2: Stitch together using the seam allowance specified on the pattern. The Mock French seam is now complete. It encases the raw edge in the same way that a French seam does, but the sewing technique is slightly different. Sew the pieces of your project together with a 1/8th inch seam allowance, and press the seam to one side. Press one side of the seam allowance in half so that the raw edge meets the center … STEP 7: Edge stitch 1/8″ of from the folded edge. Stitch along the fold with a 1/8th inch seam allowance. STEP 6: Bring both of the folded edges together and press. Even something like a sleeve curve? Press the seam open.